If your Business Unit or Warehouse requires a secure, easy to use and maintain Industrial Roller Shutter Doors then Wessex Industrial Doors can help.
Based in Yeovil, Somerset, UK, Wessex have many years of experience of designing, manufacturing and installing a range of Business Unit And Warehouse Roller Shutter Doors for the industrial sector. Within this sector, where high usage, protection from the environment and the need for larger access space controls is often the norm rather than the exception, it's important to get the right door for your specific requirements.
Additionally, Industrial Units, Warehouses and factories can often also be at the mercy of very high winds and extreme weather conditions so having an Industrial Roller Door robust enough to withstand these conditions can be a primary consideration in the specification of the roller doors used.
Nowadays, manually operated doors are fairly rare so this article will concentrate on Electrically Operated Roller Shutter Doors and these often fall in to one of two categories:
Low or High Usage: This dictates the power specification for the electric motor selected. A single or three phase electric motor drive system depending on low or high usage. A single phase motor should only be used if the door is used only a few times a day. Where a door is opening and closing many times every day, especially if the door is very high, as this means the motor is operating for longer periods during opening and closing, a three phase electric motor drive system should be selected.
Single or Double Skinned for Insulation: Having determine the usage rate above, the next selection criteria is whether the door needs to be an insulated double skinned barrier or a single skinned steel curtain without insulation properties. The double skinned Industrial Roller Doors will also offer a more robust, stronger construction so will tend to have higher wind protection ratings when installed with suitable side guides and are highly recommended.
The width and height of a door will often define the model and type of door lathes or slats to be used as each have their limitations.
The technology and materials now available in the manufacture of Industrial Business Unit and Warehouse Roller Shutter Doors it's possible to have higher opening and closing speeds (without the need for rapid action doors) .
Need Advice on Business Unit or Warehouse Roller Shutter Doors?
Call us on 01935 473708, or
BOOK FREE SERVEY CONTACT WESSEX
Our Business Unit and Warehouse Roller Shutter Doors are ideally suited for many Industrial Premises:
- Warehouses
- Factories
- Business Units and
- Commercial Lockups
Designed and built to your specific requirements our Business Unit and Warehouse Roller Shutter Doors are a versatile door that will provide superb access control to your business premises whilst retaining the integrity of the facility's environment.
We also provide upgrades to existing Roller Shutters (even those installed by other manufacturers-subject to survey).
For more information about our Business Unit and Warehouse Roller Shutter Doors, call Wessex Industrial Doors on 01935 473708 or use our contact form to discuss your requirements and set up your free site survey.
If you would like to find out how Wessex Industrial Doors can help you improve your Business Premises, or for more information on the Benefits of Industrial Roller Shutter Doors, get in touch on 01935 473708, Email: enquiry@wessexindustrialdoors.com or visit our website www.wessexindustrialdoors.com
Need Advice on Business Unit or Warehouse Roller Shutter Doors?
Call us on 01935 473708, or
BOOK FREE SERVEY CONTACT WESSEX